SW GST Series High-Precision Threading Inserts are designed for accurate and efficient thread turning in small-part machining. Manufactured through precision grinding, the inserts offer consistent dimensional accuracy and a refined cutting edge to help produce clean thread profiles and reliable surface quality. The series includes general-purpose 55° and 60° threading profiles and is compatible with dedicated GST and GST-RS tool holders.
With a sharp cutting edge, large positive rake angle and compact edge geometry, GSTT inserts support smooth cutting action and controlled chip formation in applications where thread accuracy and surface finish are important. Dedicated PVD-coated grades are available for machining steel, stainless steel and other commonly used engineering materials.
Key Features and Benefits
Precision-ground geometry: Helps maintain dimensional consistency and accurate thread profiles during small-part production.
Sharp cutting edge: Promotes smooth cutting and reduces cutting resistance in fine-pitch threading operations.
Large positive rake angle: Supports light and fast cutting, helping improve the machined surface finish.
Optimized edge geometry: A narrow edge and small-arc design help achieve a good thread surface finish.
55° and 60° thread profiles: Covers commonly used general-purpose thread forms for small components.
Dedicated PVD grades: GAT7115 and GAT7125 are offered for machining steel, stainless steel and other materials, subject to application conditions.
Matching tool holder system: GST and GST-RS holder options support external thread turning and back-turning configurations.
Product Range and Compatible Tool Holders
The GSTT insert range is developed for thread turning on small components. The available geometry includes 55° and 60° general-purpose thread profiles. Selection should be based on the required thread standard, profile angle, pitch, insert hand and machining direction.
SW GST series tooling can be paired with dedicated GST series holders and GST-RS back-turning holders. The referenced holder size options include 10 × 10 mm, 12 × 12 mm and 16 × 16 mm shanks. Confirm the exact holder designation, insert compatibility and machine clearance before ordering.
|
Holder Series |
Machining Configuration |
Typical Shank Size Options |
|
GST |
External thread turning |
10 × 10 / 12 × 12 / 16 × 16 mm |
|
GST-RS |
Back-turning configuration |
Confirm by holder model |
The GSTT series provides dedicated PVD-coated grades for small-part threading. The grades listed for this product family are GAT7115 and GAT7125. The most suitable grade depends on workpiece material, hardness, cutting speed, machine rigidity, coolant conditions and the required tool life.
|
Workpiece Group |
Material |
Grade |
Reference Cutting Speed |
|
P |
Steel, up to 300 HB |
GAT7115 |
120 m/min (60–180) |
|
P |
Steel, up to 300 HB |
GAT7125 |
90 m/min (40–150) |
|
M |
Stainless steel, up to 300 HB |
GAT7115 |
100 m/min (60–150) |
|
M |
Stainless steel, up to 300 HB |
GAT7125 |
80 m/min (40–130) |
Technical note: The cutting speeds above are reference values reproduced from the source product information, not guaranteed settings. Actual parameters must be validated through a machining trial and adjusted to the machine, workpiece and cutting conditions.
SW GST series threading inserts are suitable for precision thread turning on small components used in applications such as:
Precision mechanical components and small turned parts
Pipe joints and threaded connectors
Steel and stainless-steel components
General engineering and small-part CNC machining
Production environments requiring consistent thread quality and repeatable dimensions
The referenced application case demonstrates GSTT3RN6001 with GAT7115 in external thread turning on 20# steel. The reported setup used a cutting speed of 48 m/min, a feed rate of 1.5 mm/rev and a depth of cut of 1.04 mm, with water-based emulsion and external coolant supply.
|
Insert |
GSTT3RN6001 |
|
Grade |
GAT7115 |
|
Workpiece material |
20# steel |
|
Cutting speed |
48 m/min |
|
Feed rate |
1.5 mm/rev |
|
Depth of cut |
1.04 mm |
|
Cooling method |
Water-based emulsion / external cooling |
|
Operation |
External thread turning |
Threading Applications
For stable thread turning, select the insert profile and pitch according to the drawing and thread standard. Use a suitable multi-pass strategy rather than removing the full thread depth in one pass. The number of passes and radial infeed should be adjusted to the pitch, material, machine rigidity and required finish. Start with conservative settings, inspect the thread with the appropriate gauge, and optimize the cutting conditions based on the trial result.
Verify the thread standard, nominal diameter, pitch and profile angle before selecting an insert.
Check insert hand, holder orientation and tool-center height.
Ensure the workpiece is securely clamped and the tool overhang is minimized.
Use consistent coolant delivery where recommended for the material and operation.
Inspect thread dimensions and surface finish during initial setup and after parameter changes.
Frequently Asked Questions
What are GST series threading inserts used for?
They are designed for precision thread turning, particularly on small components where thread profile accuracy and surface quality are important.
Which thread profiles are available?
The referenced GSTT range includes general-purpose 55° and 60° threading profiles. Confirm the exact profile and pitch availability against the required part drawing.
Which grades are available for GSTT inserts?
The product information lists PVD grades GAT7115 and GAT7125 for steel, stainless steel and other material applications. Grade selection should be based on the actual machining conditions.
Which tool holders can be used with GSTT inserts?
The system includes GST series holders and GST-RS back-turning holders. Confirm the insert-holder match and holder dimensions before purchase.
How should I choose the correct threading insert?
Provide the thread standard, pitch, profile angle, workpiece material and hardness, machining direction, machine model and required quantity. These details help determine the suitable insert and holder combination.
Hot Tags: threading inserts, China threading inserts manufacturers, suppliers, factory, acme carbide threading inserts, carbide inserts for buttress threads, coarse pitch threading inserts, thread turning carbide inserts, thread turning inserts for cnc lathes, threading inserts for alloy steel

