Carbide Threading Inserts for Internal and External Thread Turning

We supply carbide threading inserts for internal and external thread turning across metric, unified, Whitworth and pipe thread applications. Our range includes TC series un-ground (moulded) inserts and a separate high-precision ground series, with different thread profiles, insert sizes and machining directions.

From general thread turning to applications requiring closer dimensional accuracy and surface finish, we offer insert options for different thread specifications and machining requirements.

 
  • Threading Inserts
    SW GST Series High-Precision Threading Inserts are designed for accurate and efficient thread turning in small-part machining. Manufactured through precision grinding, the inserts offer consistent...
  • Carbide Turning Inserts
    Turning high-temperature alloys and titanium alloys is challenging because these materials combine high strength, heat resistance and relatively low thermal conductivity. Cutting tools must...
  • Turning Tool Holder
    The M series is a double-clamp type toolholder for external turning. Each insert is held by a rigid clamp plate working together with a locating pin and stud, forming a stable three-point seat...
  • PCBN Turning Inserts
    PCBN welded turning inserts with YP geometry are designed for precision turning of hardened and quenched steel. The specially designed BHF and BHM chip-breaker geometries help maintain stable chip...
  • PCD Turning Inserts
    SW PCD (Polycrystalline Diamond) Turning Inserts are developed for precision turning and high-efficiency finishing of non-ferrous materials. The diamond cutting layer offers excellent abrasion...
  • Indexable High-Feed Milling Inserts For Roughing
    Indexable high-feed milling cutters are engineered for rapid metal removal during roughing operations in mold making, die manufacturing, and structural component production. The specialized...
  • High-Feed Milling Inserts For Mold Roughing
    High-Feed Milling Cutters for Mold Roughing are indexable cutting tools engineered for rapid stock removal in mold and die manufacturing. Their low lead-angle geometry shifts cutting forces toward...
  • EPW0603TN High-Feed Milling Inserts
    EPW0603TN High-Feed Milling Inserts are indexable carbide inserts for rough milling of steel components. Machining trials on 40CrMo tempered alloy steel covered four workpiece surfaces, with a...
  • Eight-Edge Positive-Rake ODKT Milling Inserts
    Eight-Edge Positive-Rake ODKT Milling Inserts are indexable carbide inserts for face milling and selected finishing and semi-finishing operations. The positive cutting geometry supports efficient...
  • WB Grade Wiper-Edge ODKT Milling Inserts
    WB Grade Wiper-Edge Milling Inserts are indexable carbide inserts for face milling operations where surface finish is a key requirement. The extended wiper edge helps reduce visible feed marks...
  • AL Grade ODKT Milling Inserts For Aluminum Alloys
    AL Grade ODKT Milling Inserts are indexable carbide inserts for face milling aluminum alloys. The aluminum-focused cutting geometry features a sharp edge and a polished cutting surface to support...
  • GH Grade ODKT Milling Inserts For Heavy Cutting
    GH Grade ODKT Milling Inserts are indexable carbide inserts for heavy face milling and rough machining. The GH geometry combines a reinforced cutting edge with a wide chip pocket to support...
First 12 Last
 

Carbide Threading Insert Specifications

Our TC series covers four insert sizes and two partial-profile thread angles.

Specification Options
Insert sizes 08, 11, 16, 22
Thread profiles Partial Profile 60°, Partial Profile 55°
Thread standards ISO Metric, UN, Whitworth (W), NPT, BSPT, DIN 405 Round (RD)
Thread direction Right-hand (R), Left-hand (L)
Machining direction External (E), Internal (I)
Cutting methods Radial infeed, Flank infeed
Carbide grades GM3325, GM3225, GM3220
Coating PVD
Workpiece materials Steel, stainless steel, cast iron

These options cover different thread forms and machining setups. Match the insert size to the toolholder, and check the thread standard, pitch or TPI, cutting direction and workpiece material. For internal threading, the available bore diameter is also an important selection factor.

TC Series Design for Thread Turning

The TC series combines a raised triangular geometry with a curved surface and a large chip pocket.

The triangular geometry supports both radial and flank infeed. The curved surface increases the area available for heat dissipation, while the large chip pocket provides space for chip evacuation, particularly in internal threading.

We offer three PVD-coated carbide grades for the TC series: GM3325, GM3225 and GM3220. The material range covers steel, stainless steel and cast iron. Grade selection can be matched to the workpiece material and cutting conditions.

The TC series is suitable for thread-turning applications in general machinery, automotive components, valves and pipe fittings.

High-Precision Ground Threading Inserts

For thread-turning applications requiring closer dimensional accuracy and improved surface finish, our separate high-precision ground series features stable cutting-edge treatment and a wiper design.

Its dimensional accuracy is up to ±0.025 mm. This series covers ISO, UN, NPT and BSPT thread standards.

Threading Insert Selection

A suitable insert starts with the thread drawing or specification. The thread standard and pitch determine the required profile, while the workpiece material and machining conditions help guide carbide grade selection.

For selection, consider:

  • Thread standard and pitch or TPI
  • 55° or 60° partial profile, where applicable
  • Internal or external threading
  • Right-hand or left-hand thread
  • Insert size and matching toolholder
  • Minimum bore diameter for internal threading
  • Workpiece material and cutting conditions

Sharing these details helps us identify the relevant insert size, thread profile and grade options.

Threading Application Example

We have a TC series application using a 16ER11BSPT-TC insert to machine an external thread on a 316 stainless steel union joint.

Item Application data
Insert model 16ER11BSPT-TC
Carbide grade GM3225
Workpiece material 316 stainless steel
Cutting speed 151 m/min
Feed 2.309 mm/r
Cutting depth 1.51 mm
Coolant Water-based emulsion

This machining example provides a specific reference for the insert model, grade and cutting setup.

Custom Threading Inserts

For batch orders, we can review requirements for special pitches, coatings and thread profiles.

We also handle tooling customization based on drawings, samples or technical specifications. Depending on the threading insert design, customization review can cover dimensions, geometry, carbide material and coating requirements. Inspection requirements, product identification and packaging can also be discussed as part of our broader tooling customization service.

Send us your thread drawing or sample to discuss the required insert design and customization details.

Shun Wei Precision Tooling

We are Shun Wei (Tianjin) Precision Technology Co., Ltd., based in Tianjin Airport Economic Area, China.

Our tooling operations are supported by multiple five-axis grinding centers, professional tool inspection equipment and a specialized technical team. Our business includes non-standard cutting tool manufacturing, professional tool grinding, metal-cutting solutions and tool outsourcing management.

Threading tools are part of our broader metal-cutting tool portfolio. Our tooling experience also supports non-standard requirements submitted through drawings, samples and technical specifications.

Request a Quote

Send us your insert model, thread standard, pitch or workpiece drawing, along with the material if available. We can review the relevant insert size, thread profile and carbide grade options for your application.

For customized orders, you can also share a sample or technical specification for review.

With abundant experience, we are one of the most reliable carbide threading inserts manufacturers and suppliers in China. We warmly welcome you to buy durable carbide threading inserts at competitive price from our factory. If you have any enquiry about cooperation, please feel free to email us.

carbide threading inserts, CNC Turning Insert, Indexable Milling Insert
Send Inquiry