Product Features
Double-clamp design for heavy cutting
clamp plate plus locating pin and stud lock the insert over its full seat; the edge position stays true under roughing and interrupted cuts.
01
Complete left- and right-hand coverage
every holder type is available in R and L versions for both spindle directions.
02
Six insert families in one system
80°/55° diamond, square, triangle, 35° diamond and hexagon negative inserts, from roughing to finishing.
03
15 type variants
approach angles from 45° to 117.5° for longitudinal turning, facing, shoulder turning, profiling and copying.
04
Full spare-part support
shims, pins, clamp plates, studs and wrenches are catalogued for every size, so worn parts can be replaced and the holder body reused for years.
05
How to Read the Designation
Example - MCLNR 2525 M12: M = double-clamp mechanism; C = CN insert (80° diamond); L = 95° cutting edge angle; N = 0° (negative) relief; R = right hand; 2525 = shank 25 × 25 mm; M = 150 mm length; 12 = insert IC 12.7 mm.
Length codes: K = 125 M = 150 P = 170 mm | Insert shapes: C 80° diamond · D 55° diamond · S square · T triangle · V 35° diamond · W hexagon
Quick Selection
|
Type (R/L) |
Edge angle |
Insert |
Shank |
Typical use |
|
MCLNR/L |
95° |
CN |
20/25/32 mm |
All-round turning & facing |
|
MCBNR/L |
75° |
CN |
20/25/32 mm |
Longitudinal turning |
|
MDJNR/L |
93° |
DN |
20/25/32 mm |
Turning, 55° access |
|
MDQNR/L |
107.5° |
DN |
20/25/32 mm |
Copying |
|
MDPNN |
62.5° |
DN |
20/25/32 mm |
Neutral, copying |
|
MSBNR/L |
75° |
SN |
20/25/32 mm |
Rough turning |
|
MSKNR/L |
75° |
SN |
20/25/32 mm |
Rough turning |
|
MSSNR/L |
45° |
SN |
20/25/32 mm |
Heavy roughing |
|
MTFNR/L |
91° |
TN |
20/25/32 mm |
Turning & facing |
|
MTGNR/L |
90° |
TN |
20/25/32 mm |
90° shoulder turning |
|
MTJNR/L |
93° |
TN |
20/25/32 mm |
All-round turning |
|
MTENN |
60° |
TN |
20/25/32 mm |
Neutral, facing |
|
MVJNR/L |
93° |
VN |
20/25/32 mm |
Profiling / finishing |
|
MVQNR/L |
117.5° |
VN |
20/25/32 mm |
Approach work |
|
MWLNR/L |
95° |
WN |
20/25/32 mm |
All-round, 3 edges/insert |
Available Sizes & Spare Parts
Shanks come in three cross-sections - 20 × 20 mm (length 125 mm), 25 × 25 mm (150 mm) and 32 × 32 mm (170 mm) - covering light to heavy duty lathes. Each size group shares one set of spare parts: for example, all 2525 holders with CN 1204 inserts use shim DCN1204MH, pin SPM060170H, clamp plate CAM02H and stud SDM060250H, with wrench TH25LH/TH30LH. Keeping one spare-parts kit per machine covers the whole series, which keeps inventory low and downtime short.
Applications
The double-clamp system is built for external turning on CNC lathes: longitudinal turning, facing, shoulder turning, profiling and copying. Its rigid insert seat makes it a solid choice for roughing and interrupted cuts on shafts, flanges, housings and castings. Pair the holders with matching negative insert grades for the workpiece material.
Why Double Clamp?
Screw-clamped holders fix the insert with a single screw. The M series adds a clamp plate locked onto a locating pin and stud - the insert cannot lift under heavy load. Indexing takes seconds: loosen the plate, turn the insert, re-clamp. All wearing parts are separately replaceable.
Hot Tags: turning tool holder, China turning tool holder manufacturers, suppliers, factory, CNC Turning Insert, left hand carbide inserts, multi edge threading inserts, thread turning carbide inserts, Thread Turning Insert, un carbide threading inserts

