CNC Tool Holders for Different Machining Requirements
A tool holder must match the machine spindle, cutting tool shank and required working length. Its clamping structure, nose dimensions and coolant arrangement also determine whether it fits the machining setup.
At Shun Wei Precision Technology Co., Ltd., our CNC tool holder range includes Hydraulic Tool Holders, ER Collet Chucks, Shrink Fit Chucks, Side Lock Holders, Face Mill Holders, Boring Tool Holders, Drill Chuck Holders, Tapping Chucks and Morse Taper Adapters.
We offer different spindle interfaces, clamping methods and holder dimensions. For special requirements, we can evaluate customized bore diameters, lengths, nose dimensions, coolant passages and sealing structures based on technical drawings and samples.
-
Hydraulic Reduction SleevesHydraulic Reduction Sleeves adapt compatible hydraulic tool holders to smaller cylindrical tool shanks. The sleeve fits the holder bore and provides a precision bore for the cutting tool, allowing...
-
Extended-Length Hydraulic Tool HoldersExtended-Length Hydraulic Tool Holders provide additional reach for CNC machining of deep cavities, recessed surfaces and features with limited tool access. An internal hydraulic expansion...
-
Slim Hydraulic Tool HoldersSlim Hydraulic Tool Holders combine hydraulic expansion clamping with a narrow nose profile for precision machining in restricted spaces. The internal clamping mechanism secures cylindrical-shank...
-
CAT Hydraulic Tool HoldersCAT Hydraulic Tool Holders use an internal hydraulic expansion mechanism to clamp compatible cylindrical-shank cutting tools. The CAT spindle interface provides the machine connection, while...
-
HSK-A Hydraulic Tool HoldersHSK-A Hydraulic Tool Holders secure compatible cylindrical-shank cutting tools through an internal hydraulic expansion mechanism. The clamping system applies radial pressure around the tool shank...
-
BT Hydraulic Tool HoldersBT Hydraulic Tool Holders clamp compatible cylindrical-shank cutting tools through an internal hydraulic expansion mechanism. The system provides concentric clamping and helps control radial...
-
High-Speed Balanced ER Collet ChucksHigh-Speed Balanced ER Collet Chucks hold cylindrical-shank cutting tools for CNC machining applications requiring controlled rotation and accurate tool positioning. The ER clamping system...
-
Coolant-Through ER Collet ChucksCoolant-Through ER Collet Chucks deliver cutting fluid through an internal passage toward the cutting zone. The ER clamping system secures compatible cylindrical-shank tools with a matching collet...
-
Extended-Length ER Collet ChucksExtended-Length ER Collet Chucks provide additional tool reach for CNC machining operations involving deep cavities, recessed surfaces, narrow slots, and restricted access areas. The ER clamping...
-
Slim ER Collet ChucksSlim ER Collet Chucks are CNC tool holders with a reduced front-end profile for machining areas with limited clearance. The ER clamping system accommodates compatible cylindrical-shank cutting...
-
Short ER Collet ChucksShort ER Collet Chucks are designed to hold cylindrical-shank cutting tools in CNC machining applications where compact holder dimensions and spindle clearance are important. The holder uses a...
-
High-Precision ER Collet ChucksHigh-Precision ER Collet Chucks hold cylindrical-shank cutting tools for CNC milling, drilling, and precision component machining. The assembly uses an ER collet and clamping nut to secure the...
Tool Holder Types and Specifications
The following specifications cover our published product series. Individual dimensions and performance ratings depend on the selected model.
| Product Series | Specifications |
|---|---|
| High-Speed Balanced ER Collet Chuck | ER16: 1–10 mm; ER20: 1–13 mm; ER25: 1–16 mm; ER32: 2–20 mm. BT30/40/50, HSK-A63, CAT40. Runout ≤0.005 mm; G2.5 at 30,000 RPM; maximum speed 30,000 RPM; material 20CrMnTi; hardness HRC 58–62; extension lengths 50, 60, 100 and 120 mm. |
| High-Precision ER Collet Chuck | ER16: 1–10 mm; ER20: 1–13 mm; ER25: 1–16 mm; ER32: 2–20 mm; ER40: 3–26 mm. BT30/40/50, ISO, SK, HSK-A63 and HSK-A32. Gauge lengths 50–160 mm; standard runout ≤0.005 mm, optional ≤0.002 mm; G2.5 at 25,000 RPM; materials 20CrMnTi or bearing steel; hardness HRC 58–62. |
| Slim ER Collet Chuck | ER11: 1–7 mm; ER16: 1–10 mm; ER20: 1–13 mm; ER25: 1–16 mm; ER32: 2–20 mm; ER40: 3–26 mm. HSK-A63. Gauge length 100 mm; nose diameter 16 mm; overall length 160 mm; runout ≤0.005 mm; maximum speed 18,000 RPM; G2.5; coolant pressure 20 bar. |
| CAT Hydraulic Tool Holder | CAT40/CAT50; interface standard ANSI/ASME B5.50. Metric bores: 6, 8, 10, 12, 16, 20, 25 and 32 mm. Inch bores: 1/4", 3/8", 1/2", 3/4" and 1". Gauge lengths 64, 80, 100, 120 and 160 mm; G2.5 at 25,000 RPM; maximum speed 25,000 RPM; AD/B internal coolant compatibility. |
| Slim Hydraulic Tool Holder | Clamping diameters 6, 8, 10, 12 and 16 mm. Extension lengths 80, 100 and 120 mm; nose diameters 24, 28 and 32 mm; overall lengths 110, 130 and 150 mm; runout ≤0.003 mm; maximum speed 25,000 RPM; G2.5; tool shank tolerance h6; optional internal coolant. |
| Extended-Length Hydraulic Tool Holder | HSK-A, BT and CAT, depending on model; clamping diameters 6–25 mm. Gauge lengths 100–200 mm; overall lengths 150–250 mm; nose diameters 20–40 mm; internal or external coolant, depending on design. |
| Hydraulic Reduction Sleeve | 20 mm outside diameter; bore options 6, 8, 10 and 12 mm. Overall length 50.5 mm; typical bore tolerance H7; typical runout ≤0.003 mm; alloy steel; maximum working speed 20,000 RPM; internal coolant compatible. |
| Shrink Fit Chuck | Interface and bore specifications depend on model. Typical runout ≤0.003 mm; selected models ≤0.001 mm; standard G2.5 at 25,000 RPM; selected high-speed models G1.0 at 50,000 RPM; special stainless steel or heat-resistant tool steel; typical hardness HRC 50–54. |
| BT Shrink Fit Chuck with 4.5° Coolant | BT interface; 4.5° nose angle. Runout ≤0.003 mm under 3×D measurement conditions; G2.5 at 25,000 RPM; higher balancing requirements subject to specification; face coolant outlets. |
Choose the Right Tool Holder Structure
Hydraulic Tool Holders
Our Hydraulic Tool Holders use an internal hydraulic mechanism to apply radial pressure around the cutting tool shank. This circumferential clamping structure differs from conventional side-lock clamping.
We offer three main configurations:
- CAT Hydraulic Tool Holders: CAT40 and CAT50 interfaces, with metric and inch clamping bore options.
- Slim Hydraulic Tool Holders: Reduced nose dimensions for machining areas with limited clearance.
- Extended-Length Hydraulic Tool Holders: Longer gauge lengths for applications requiring additional tool reach.
Our Hydraulic Reduction Sleeves provide 6, 8, 10 and 12 mm bore options in a 20 mm outside diameter design. They allow compatible hydraulic holders to accommodate smaller cylindrical tool shanks.
ER Collet Chucks
ER Collet Chucks use interchangeable spring collets to clamp cutting tools with different shank diameters.
Our range includes High-Speed Balanced, High-Precision, Slim, Short, Coolant-Through and Extended-Length ER configurations, covering ER11 through ER40 across the listed series.
The High-Precision ER series offers a standard runout of ≤0.005 mm, with an optional ≤0.002 mm configuration. Slim ER designs feature a smaller nose profile for machining restricted spaces.
Shrink Fit Chucks
Shrink Fit Chucks secure cutting tools through thermal expansion and contraction. Heating expands the holder bore for tool insertion; cooling contracts it around the tool shank.
Our range includes standard shrink fit designs and a BT model with a 4.5° nose angle and face coolant outlets. The angled nose provides a slim holder profile, while the face outlets provide coolant delivery at the holder end.
Additional Tool Holder Types
We also offer:
- Side Lock Holders
- Face Mill Holders
- Boring Tool Holders
- Drill Chuck Holders
- Tapping Chucks
- Morse Taper Adapters
These product types provide different cutting tool connection and machining options.
Customized Tool Holder Dimensions and Configurations
When standard specifications do not match your machine or cutting tool requirements, we can evaluate customized designs based on drawings, samples and application details.
Available customization items include:
- Spindle interfaces: BT, HSK, CAT and other specified interfaces, subject to product evaluation.
- Clamping bores: Special bore diameters and tool shank sizes.
- Gauge and overall lengths: Customized working lengths and holder dimensions.
- Nose dimensions: Special nose diameters and external profiles.
- Holder geometry: Customized outer dimensions and structural details.
- Coolant passages: Internal coolant channels and face coolant outlets.
- Sealing structures: Specified sealing arrangements according to holder design.
- Pull studs: Matching pull stud requirements for CAT Hydraulic Tool Holder projects.
- Product identification: Customized product markings and labels.
- Packaging: Specified packaging and labeling requirements.
For customized projects, send us your required spindle interface, cutting tool shank diameter, target dimensions and technical drawing or sample. Our technical team can review the proposed configuration and manufacturing requirements.
Manufacturing and Technical Support
Shun Wei Precision Technology Co., Ltd. is based in Tianjin Airport Economic Area, China.
Our manufacturing resources include multiple five-axis grinding centers, dedicated tool inspection equipment and a professional technical team.
Our OEM/ODM workflow includes technical drawing review, manufacturing process evaluation, precision grinding, dimensional and geometrical inspection, and inspection records. We also maintain drawing version management for repeat orders.
These resources support technical specification review, manufacturing coordination and drawing consistency when processing repeat orders.
Our wider product portfolio also includes Milling Tools, Petroleum Pipe Thread Tools, Machine Tool Accessories, Lathe Chucks and Carbide Threading Inserts.
Request a Tool Holder Quotation
Send us your required tool holder type, spindle interface, clamping diameter and order quantity.
For non-standard designs, include your technical drawing or sample together with the required dimensions.
Our team will review your specifications and prepare quotation information for the requested configuration.
With abundant experience, we are one of the most reliable tool holder manufacturers and suppliers in China. We warmly welcome you to buy durable tool holder at competitive price from our factory. If you have any enquiry about cooperation, please feel free to email us.
ER Spring Collet Tool Holder NT, Hydraulic Tool Holder, tool holder
